| Esky 4 channel USB Tx |
|
Esky digital 6-channel transmitter that comes with the Honey Bee King 2 Required this: There is a dipswitch under the third battery from the right. I switched 1 to on and 2 to off. The transmitter comes with 1 in the off position and 2 in the on position. |
| E sky 0905A |
| Esky 4-channel tx (0404) with SmartPropoPlus and PPJoy |
| USB-connected RC flight controller from ExceedRC Available here |
|
JR XF622 TX with the Xtal and Antenna removed, and JSIM USB to JR TX interface. USB Version I have is: http://www.rc-electronics.co.uk/usb.htm JSIM installs as a "HID Game Controller: 4 Axis 4 Button Joystick". |
| dynam 6ch usb sim tx controller |
|
Futaba 9c + cheapo FMS usb cable Futaba Skysport 6A, Futaba Conquest FP, Futaba FG gold series, all with USB cables |
| Futaba FG series tx, through SmartPropoPlus |
| G3 controller |
| RealFlight 2 Interlink Controller |
| G4 Interlink Elite |
| dx7 with universal usb cable. |
| DX7 TX and the Milehighwings cable |
| DX7, FS-One Interface and FS-One Spektrum WL1000 Wireless adapter |
| Hitec Eclipse 7ch transmitter and GWS USB cable |
| Reflex iVol controller set in joystick mode |
|
I was able to get HeliSim to work with the controller and cable that came
with a Falcon 40 from Xheli.com/Raidentech.com. This is a parallel port
using PPJoy. See the link below for the instructions I used. The control may be a ZHEN HUA PCM-4.
http://www.rcuniverse.com/forum/m_4826535/mpage_15/key_/tm.htm |
| I bought a usb controller (sold as Flight Simulator FMS Cable Helicopter RC Controller USB) on ebay for 10$ to 15$ including shipping. It's working great with my JR radio and also have all the adaptors for most of the others brands. I was able to set it up in about 5 min as long as you go in advance and select it as the default controler on the game controler panel. I did not have to install any software like Propo, and PPjoy. |